Overview; Tools; Screws - Epson GT-1200 Service Manual

ADF

4.1 OVERVIEW

This chapter describes how to dissemble the auto document feeder (ADF).
If no instruction is given, assembly can be carried out by reversing the
disassembly procedures.
CAUTION
Since the ADF consists of many metal frames, be
careful not to cut yourself with the frame edges.

4.1.1 Tools

The tools required to disassemble/assemble the TPU are as listed below:
Tool Name
Phillips screw driver (No.2)
Thickness gauge set (#F518)
Rev. A
Availability SE Part No.
¡
SE exclusive B776702201

4.1.2 Screws

Types of screws used for the ADF are listed in the table below. Make sure
that you use the specified type and number of screws for each part.
Table 4-1. Screw List
Screw Type /
No.
Specification
1 CBP M3x12
2 CBS Sems M3x8
3 CBS Sems (2) M3x6
4 CBS M3x6
5 CPS Sems B M3x5
6 CBP M3x10
CB with toothed
7
washer M3x12
Disassembly and Assembly
Appearance Color
Silver
Silver
Red copper
Red copper
Red copper
Black
Gold
4-1