Download
Share
Print this page
Epson GT-15000 Setup Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Scanner
  5. GT-15000 Series
  6. Setup manual
Epson GT-15000 Setup Manual

Epson GT-15000 Setup Manual

Hide thumbs Also See for GT-15000:

Advertisement

Quick Links

Download this manual See also: User Manual

Advertisement

loading

Related Manuals for Epson GT-15000

Summary of Contents for Epson GT-15000

  • Page 2 Information on EPSON Scanner Software (online help) Provides you with detailed information on EPSON Scan. To access the online help, click the Help button in the EPSON Scan window. Information on other Software Refer to the respective documentation for the information.

  • Page 3: Table Of Contents

    ® Color Image Scanner Setup Guide 1 Safety Instructions....1 2 Getting to Know Your Scanner ..4 3 Installing the Software .
  • Page 4 Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product.

  • Page 5: Safety Instructions

    Safety Instructions Important Safety Instructions Read all these instructions and save them for later reference. Follow all warnings and instructions marked on the scanner. Unplug the scanner before cleaning. Clean with a damp cloth only. Do not spill liquid on the scanner. Do not place the scanner on an unstable surface, or near a radiator or heat source.
  • Page 6 Except as specifically explained in this Setup Guide and the Online Reference Guide, do not attempt to service the scanner yourself. Unplug the scanner and refer servicing to qualified service personnel under the following conditions: If the power cord or plug is damaged. If liquid has entered the scanner.
  • Page 7 For United Kingdom Users Safety information Warning: This appliance must be earthed. Refer to the rating plate for voltage and check that the appliance voltage corresponds to the supply voltage. Important: The wires in the mains lead fitted to this appliance are colored in accordance with the following code: Green and yellow —...

  • Page 8: Getting To Know Your Scanner

    Getting to Know Your Scanner Unpacking the Scanner Your EPSON GT-15000 comes shipped with CD-ROMs which include the driver software that runs your scanner, and some additional items. The contents may vary in certain locations. power cord scanner USB interface cable...
  • Page 9 IEEE 1394 standard. EPSON Network Image Express Card (B80839 ) Enables an EPSON scanner supporting EPSON Scan and network connection to become shareable on a network. This allows you to perform various scanning operations in a network environment using less power and space.

  • Page 10: Installing The Software

    The EPSON Installer Program dialog box appears. Select your preferred language and then click Note: If the EPSON Installation Program dialog box does not appear, click the CD-ROM icon, and then select Open from the File menu. Double-click SETUP.EXE. 2. Select Install Software and then click 3.
  • Page 11 Note for Windows XP and 2000 users: If a dialog box appears during the installation, to indicate performing Windows test, click Continue Anyway (for Windows XP users) or Yes (for Windows 2000 users) to continue. 4. When a message appears to indicate that installation is complete, click OK.

  • Page 12: Setting Up The Scanner

    Setting up the Scanner Choosing a Place for the Scanner Follow the guidelines below when selecting a location for your scanner: Place the scanner on a flat, stable surface. The scanner will not operate properly if it is tilted at an angle. Place the scanner close enough to the computer for the interface cable to reach it easily.
  • Page 13 Allow space behind the scanner for the cables, and space above the scanner so that you can fully raise the document cover. 573 mm 132 mm 150 mm or more 458 mm 656 mm Keep the scanner away from high temperatures, humidity and excessive dirt or dust.
  • Page 14 Setting Up 1. Pull up the transportation lock to the unlocked position. transportation lock 2. Make sure that the scanner is turned off. The scanner is off when the Power button is raised. Power button Setting up the Scanner...
  • Page 15 3. If the power cord is not attached to the scanner, connect it to the AC socket on the back of the scanner, and plug the other end into an electrical outlet. 4. Turn on the scanner by pressing the Power button. Ready light Power button The scanner turns on and starts initialization.
  • Page 16 Connecting the Scanner Using the SCSI Interface For instructions on connecting the scanner to your computer using the SCSI interface, read this section. Note: Be sure to install the scanner software before connecting the scanner to your computer. See “Installing the Software” on page 6 for details. Unless your PC already has a SCSI board installed, you need to install one, along with SCSI driver software.
  • Page 17 Setting the SCSI ID number The scanner's default SCSI ID number is 2. The SCSI ID rotary switch If you add the scanner to a system in which one of your SCSI devices already has a SCSI ID of 2, change the ID number to an unused number using the rotary switch.
  • Page 18 Setting the terminator switch The scanner has a built-in terminator, which allows SCSI devices to communicate properly with each other. You may need to change the terminator switch setting according to your computer system. Note: Do not use an external terminator. The terminator switch When you connect the scanner to the end of the daisy chain, turn...
  • Page 19 Connecting the scanner Connect the scanner to your computer or to another SCSI device as follows: Note: The combination of connectors on the SCSI interface cable you need varies depending on the maker of your SCSI device and SCSI interface board.
  • Page 20 SCSI devices. Note: After connecting your computer and scanner, when turning on your system at the first time, your scanner name is displayed as EPSON Scanner ES-7000H and as new hardware. Note: Before turning on your system, be sure to read “Power-on sequence”...
  • Page 21 In this case, try connecting the scanner directly to the computer’s USB port. Also, your system may not work properly if you use a USB cable other than that supplied by EPSON. Setting up the Scanner...
  • Page 22 Connect one end of the cable to the USB port on the back of the scanner, and the other end to a USB hub or the USB port on your computer. USB interface connector Note: For USB 2.0 Hi-speed connection, connect the scanner directly to a USB 2.0 port in your PC using the USB Hi-speed cable.

  • Page 23: Using Your Scanner

    Using Your Scanner Placing a Document on the Scanner 1. Make sure the scanner is turned on. Ready light Power button 2. Open the document cover and place the document face down on the document table. corner of the document Note: An area 1±0.5 mm from the horizontal and the vertical edges of the document table glass will not be scanned.
  • Page 24 Online Reference Guide, or Software online help. Scanning Your Document Using EPSON Scan EPSON Scan provides three modes for you to modify any scanning settings: Home Mode, Office Mode, and Professional Mode. This section describes how to scan an image in the Home Mode.
  • Page 25 2. Select Import from the File menu, and then choose your scanner. EPSON Scan starts. Note for Windows XP users: Do not choose WIA-EPSON GT-15000 from the menu to select the scanner. If you select it, you cannot use the EPSON scanner function fully.
  • Page 26 EPSON Scan automatically previews the images, which appear in the Preview window. Note: If the Auto preview check box is selected, preview scanning automatically starts when you access the Home Mode. If this check box is cleared, previewed image does not appear automatically. Click Preview.
  • Page 27 5. Click Scan. EPSON Scan starts scanning. 6. The scanned image is sent to Adobe Photoshop Elements. Click Close to finish EPSON Scan, if necessary. 7. Select Save As from the File menu in Adobe Photoshop Elements.

  • Page 28: Options

    Unpacking the Automatic Document Feeder When you unpack, make sure you have all the parts shown below and that none is damaged. If you find any missing or damaged items, contact your EPSON dealer immediately. Automatic Document Feeder feet (2) for other...
  • Page 29 The Automatic Document Feeder is large, so you should clear sufficient space around the scanner. Follow the steps below to install the Automatic Document Feeder on your EPSON scanner: 1. Make sure your scanner is turned off and unplug the power cord.
  • Page 30 3. Attach the two smaller feet with a groove on the side as shown below. Note: When removing the feet, turn and remove them as shown below: 4. Insert the installation screws into the holes on the back of the scanner, and then secure them using the included screwdriver.
  • Page 31 5. Align the installation screws with the holes in the Automatic Document Feeder. Slide the holes over the installation screws. Warning: The Automatic Document Feeder is heavy. Ask for assistance when lifting it. 6. Secure the knobs to the ends of the installation screws using the included screwdriver.
  • Page 32 7. Attach the Automatic Document Feeder’s connector to the scanner’s option interface. 8. Close the Automatic Document Feeder. 9. Connect the power cord to the scanner and then turn on the scanner. For details on how to use the Automatic Document Feeder, see the Reference Guide - Option on the software CD-ROM.
  • Page 33 System requirements Hardware: PC with built-in IEEE 1394 OHCI Host Controller ® supported by Microsoft , or PC with IEEE 1394 PCI board installed ® ® Microsoft Windows XP, 2000 Professional, or Me pre-installed with IEEE 1394 OHCI port Installing the IEEE 1394 Scanner I/F Card in your scanner To use your scanner as an IEEE 1394 device, you need to install the optional IEEE 1394 Scanner I/F Card.
  • Page 34 Caution: Static electricity can damage electronic components. Discharge static electricity by touching the metal frame of your scanner before handling the interface board. 3. Insert the Scanner I/F Card along the side guide rails into the expansion slot in the optional interface slot. 4.
  • Page 35 Understanding IEEE 1394 connections The Scanner I/F Card is equipped with two cable connectors. One is used to connect the card to the computer, and the other is used to connect other IEEE 1394 devices in a daisy chain or tree configuration.
  • Page 36 Reference Guide. See “Viewing the Online Guide” on page 33. Using the Optional Network Image Express Card The EPSON Network Image Express Card enables an EPSON scanner supporting network function to be used on a network. This is an alternative to having the scanner connected to a server PC.

  • Page 37: To Know More About Your Scanner

    The EPSON Installer Program dialog box appears. Select your preferred language and then click Note: If the EPSON Installation Program dialog box does not appear, click the CD-ROM icon, and then select Open from the File menu. Double-click SETUP.EXE. 2. Select User Guides and then click...
  • Page 38 3. To view the Reference Guide, click View Reference Guide. To copy the Reference Guide to your computer, click Install Reference Guide. Online Help Online Help comes with your software. It provides detailed information on the software. Click the HELP button on the dialog box of the software.