Installing The Rear Adapter Retention Bracket - Lenovo THINKSERVER 3822 Hardware Maintenance Manual

Installing the rear adapter retention bracket

To install the rear adapter retention bracket, do the following:
1. Insert the bottom hinge point on the rear adapter retention bracket into the
2. Install the adapters (see "Installing an adapter" on page 184).
3. Close the rear adapter retention bracket.
4. Install and lock the side cover (see "Installing the left-side cover" on page 158).
5. Reconnect the external cables and power cords; then, turn on the attached
1
Rear adapter retention bracket
2
Hinge pins
matching hole in the chassis; then, insert the top hinge point into the matching
hole.
devices and turn on the server.
Chapter 7. Installing optional devices and replacing customer replaceable units
183