Using The Setup Utility; Starting The Setup Utility; Setup Utility Menu Choices - Lenovo THINKSERVER 3822 Hardware Maintenance Manual

|
|
| |
| |
| | |
| | |
| |
| |
|
|

Using the Setup Utility

Starting the Setup Utility

Setup Utility menu choices

252
ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Hardware Maintenance Manual
Table 22. Server configurations and applications for configuring and managing RAID
arrays (continued)
Server configuration
ServeRAID-MR10i SAS/SATA
Controller (LSI 1078)
installed
Use the Setup Utility, formerly called the Configuration/Setup Utility program, to
perform the following tasks:
v View configuration information
v View and change assignments for devices and I/O ports
v Set the date and time
v Set the startup characteristics of the server and the order of startup devices
v Set and change settings for advanced hardware features
v View, set, and change settings for power-management features
v View and clear error logs
v Resolve configuration conflicts
To start the Setup Utility, do the following:
1. Turn on the server.
Note: Approximately 3 minutes after the server is connected to ac power, the
power-control button becomes active.
2. When the prompt <F1> Setup is displayed, press F1. If you have set an
administrator password, you must type the administrator password to access the
full Setup Utility menu. If you do not type the administrator password, a limited
Setup Utility menu is available.
3. Select the settings to view or change.
The following choices are on the Setup Utility main menu. Depending on the
version of the firmware, some menu choices might differ slightly from these
descriptions.
v System Information
Select this choice to view information about the server. When you make changes
through other choices in the Setup Utility, some of those changes are reflected in
the system information; you cannot change settings directly in the system
information.
This choice is on the full Setup Utility menu only.
– System Summary
Select this choice to view configuration information, including the ID, speed,
and cache size of the microprocessors, machine type and model of the server,
the serial number, the system UUID, and the amount of installed memory.
When you make configuration changes through other choices in the Setup
RAID array configuration
(before operating system is
installed)
MegaRAID BIOS
Configuration Utility (press C
to start)
RAID array management
(after operating system is
installed)