Ventilation Of The Spray Booth - WAGNER GM 5000EA Operating Manual

EDITION 03/2012
OPERATING MANUAL
The GM 5000EA spray gun must be used a part of an electrostatic spraying system
(spray-pack). The spraying system shown in the fi gure B_03233 is only one example of
an electrostatic air spraying system. Contact your Wagner distributor for assistance in
designing a system to meet your needs. The operating instructions and the safety
regulations for the additional system compo-nents used must be read before starting-up.
Incorrect installation/operation!
Risk of injury and damage to equipment
SIHI_0050_GB
5.1.2

VENTILATION OF THE SPRAY BOOTH

The electrostatic hand spraying equipment is for use only in spray areas which correspond
with standard EN 12215.
The electrostatic hand spraying equipment has to be locked to the technical ventilation
so that the coating material supply and the high-voltage are not effective as long as the
technical ventilation is not operated with the minimum exhaust air volume fl ow or a larger
exhaust air volume fl ow.
Ensure that the excess coating material (overspray) will be collected up safely.
Toxic and/or flammable vapor mixtures!
Risk of poisoning and burns
SIHI_0028_GB
ORDER NUMBER DOC 2319149
WARNING
When putting into operation and for all work, read and follow
the operating instructions and safety regulations for the additionally
required system components.
WARNING
Operate the unit in a spraying booth approved for the working
materials.
-or-
Operate the unit on an appropriate spraying wall with the
ventilation (extraction) switched on.
Observe national and local regulations for the outgoing air
speed.
GM 5000EA
23