Setting of Logical Seek
The head's operation varies depending on the LOGICAL
SEEK settings, as shown in the figure below.
Movement of heads when LOGICAL seek is OFF
UNI-DIRECTIONAL
Media
Print erea
Red arrow :
Movement of head
Movement of heads when LOGICAL seek is ON
UNI-DIRECTIONAL
Media
Print erea
Red arrow :
Movement of head
1
Press the
LOCAL.
2
Press
to select SETUP 1 to 4, and
press the
• SETUP MENU will be displayed.
3
Press
to serect "LOGICAL
SEEK" , and press the
4
Press
to select a set value, and
press the
• Set value : HOST / ON / OFF
5
Press the
end the setting.
BI-DIRECTIONAL
Media
BI-DIRECTIONAL
Media
key in
(MENU)
key.
key.
key.
key several times to
Setting of Drying Time
In the drying time setting, the following items for ink drying
time are set.
• SCAN
: Ink drying time for each scanning is set. (During
bidirectional printing, the machine stops for a
certain period of time specified for each of the
outward and return scanning.)
• PRINT END : Ink drying time for after printing is set.
• When you give priority to the setting at the
RasterLink side, make the setting value "Host".
• "SCAN" set in this machine is displayed as "Pause
Time per Scan" in the RasterLink.
• You cannot specify the print end at the RasterLink
side. When you set this machine to "Host", printing
will be performed in "PRINT END= 0 sec." status.
1
Press the
LOCAL.
2
Press
to select SETUP 1 to 4, and
press the
• SETUP MENU will be displayed.
3
Press
to select "DRYING TIME",
and press the
4
Press the
5
Press
time, and press the
• Set the drying time for canning and after printing
is completed. To enable the drying time specified
in your RIP, select "Host".
• Scanning setting value :
Host or 0.0 sec. to 9.9 sec.
• Print end setting value:
Host or 0 sec. to 120 min.
• Item selecting:by the [][] keys
• Time setting:by the [][] keys
6
Press the
end the setting.
Chapter 3 Setup
key in
(MENU)
key.
key.
key.
to set drying
key.
key several times to
3
2
2
2
3-7