Nozzle Recovery Function - MIMAKI CJV150-75 Operation Manual

5
Wipe ink sticking to the side of the head off
with a clean stick.
• Never rub the nozzles.
Clean the side surface of the head
(shown in deep gray) with a clean stick.
The nozzle part (Never
touch it.)
Clean with a clean stick or a waste cloth.
6
Press the key after the cleaning.
7
Close the maintenance cover, and press
the key.
• After its initial operation, the machine returns to
LOCAL.

Nozzle Recovery Function

NOZZLE RECOVERY: When nozzles missing can not be
improved at specific points, other good nozzles can be
used as alternatives for printing.
1
Press the
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press to select "NOZZLE
RECOVERY", and press the
3
Press the
• Printing of the nozzle pattern will start.
• Select "ENTRY" then "Move to select of the
Nozzle line (Step 4) without drawing a pattern"
Overhead view
Nozzle pattern
H1-A H1-B H1-C H1-D
• For 6-color ink sets, the nozzle patterns "H1-B"
and "H1-D" are not printed.
• When using leaf media, set a media of more than
A3 size put horizontally. If a media with narrow
width is set, printing will only be conducted to
midway.
4
Select the Nozzle line that needs NOZZLE
RECOVERY by pressing
press key.
Head No.
(H1 to H2)
Chapter 5 Maintenance
(MENU)
key.
key twice.
H1-E H1-F H1-G H1-H
, and
Nozzle line
5
2
5-11