MAINTENANCE MENUs at-a-glance
Item
For carrying out maintenance on the carriage and station periphery.
CARRIAGE OUT
(
P.5-6)
NOZZLE WASH
(
P.5-7)
STATION
DISWAY WASH
MAINTENANCE
(
P.5-8)
CUSTODY WASH
(
P.5-8)
WIPER EXCHANGE
(
P.5-15)
For printing using another nozzle, if nozzle wash and so forth fail to effect recovery from nozzle clogging, etc.
NOZZLE
PRINT
RECOVERY
ENTRY
(
P.5-11)
RESET
For having the various maintenance functions executed automatically. Set the execution interval for each
maintenance function.
REFRESH
AUTO
TUBE WASH
MAINTENANCE
(
P.5-12)
CLEANING
CLEANING TYPE
INK FILLING
Supplies ink to correct nozzle clogging.
(
P.5-14)
INK TANK
EXGHANGE
Resets or corrects the used count for the waste ink tank.
(
P.5-17)
WHITE/SILVER
MAINT.
Executes the white and silver ink maintenance.
(
P.5-14)
Set value
Moves the carriage out, for carrying out cleaning of the cap periphery,
head, wipers, etc.
Soaks the nozzle surfaces in maintenance cleaning fluid, for carrying
1 to 99min
out recovery from nozzle clogging or bent.
Executes washing of the suction pump tubes.
Carried out when the machine is going to be out of use for an extended
1 to 99min
period. Washes the nozzles and tubes beforehand, to keep the
machine in fine condition.
Used when replacing the wiper. If the wiper is replaced, the number of
times the wiper was used that is managed in this device is reset.
Prints a pattern, to identify the nozzle that is clogged.
Registers the faulty nozzle identified by "PRINT".
Resets a registered faulty nozzle.
The set value will
For setting the activation interval for refresh.
differ according
For setting the activation interval for tube wash.
to the ink type
For setting the activation interval for head cleaning.
being used.
NORMAL/ SOFT/
For setting the type of head cleaning.
HARD
Chapter 5 Maintenance
Meaning
5
2
5-5