Stopping A Printing Operation; Deleting Received Data (Data Clear); Cutting A Media - MIMAKI CJV150-75 Operation Manual

Stopping a Printing Operation

Perform the following operation when stopping a printing
operation halfway.
1
Press the
• The printing operation stops.
• Interrupt data sending at the PC side during the
data is sent from the PC.
• Printing restarts from the interrupted data by
repressing the [REMOTE] key.

Deleting Received Data (Data Clear)

When you want to stop printing, delete the already
received data.
1
Press the
(DATA CLEAR) in LOCAL.
2
Press the
• The received data is erased then it returns to the
Local.

Cutting a media

By using the keys on the operation panel, you can cut the
media at any position.
1
In Local, Press
• It enters into the origin setting mode.
• By pressing [] , feed the media to the cutting
position.
2
Press the
• The media is cut.
• When the cutting has been completed, the current
mode returns to LOCAL.
(LOCAL) during printing.
key, and press the
key.
.
key.
Chapter 2 Basic Operation
2
2
2
2
2
2-21