Maximum Print Area/Cut Area; Notes When Using Media Holder - MIMAKI CJV150-75 Operation Manual

Chapter 2 Basic Operation

Maximum Print Area/Cut Area

The maximum printed area/cut area varies, depending on the position of the pinch roller(
position ( P.2-16). The white area shown in the following figure represents the maximum print/ cut area.
The area other than that is the dead space that cannot be printed/cut.
Maximum printing/cut width

Notes When Using media Holder

Setting Position of the Media
Set the media so that the right end of the media will be inside the area shown below.
The End of the Media Should Not Exceed the Slit Line on the Platen
Media
2-10
CJV150-75 CJV150-107
800mm
Set the media so that the right end of the media will be inside the
area shown by an arrow. (up to the 3rd grid roller from the right
end in front of the main body)
Slit line
Media press
CJV150-130
1090mm 1361mm
P.2-6 to P.2-9) and the origin
CJV150-160
1610mm