Entry; Redialing A Number; Using Handsfree Speakerphone; Using A Headset - Aastra 6735i User Manual

Calling a Speeddial Entry
Depending on the keys configured for speed dial, you can call speed dial entries in one of the following ways:
• Press the programmed Speed Dial softkey, and then press the one- or two-digit code assigned to the speed dial num-
ber you want to call.
• Press a softkey that has been assigned to call a speed dial entry.
• Press and hold a keypad key that has been assigned to call a speed dial entry.

Redialing a Number

By default, the 6735i has a dedicated Redial key. Pressing the Redial key displays the Redial List.
The redial list is available during active calls. It stores up to the last 100 numbers you called, allowing you to scroll through
and select the number you wish to redial.
to display the most recently dialed number and use 2and 5 to scroll through the list to view the other
1. Press
numbers.
Note:
Press twice to redial the most recently dialed number.
Press 2 to see the second most recently dialed number, or 5 to see the oldest call on your list.
2.
3. To dial the displayed number press
4. Press or the key to cancel.

Using Handsfree Speakerphone

The handsfree feature allows you to speak to someone without using the handset or headset. Your phone must be in
either the Speaker or Speaker/Headset audio mode. For more information about setting the audio mode on your phone,
.
see "Set Audio" on page 25
• To dial using handsfree, first press
• To answer a call on your phone using handsfree, press
• If you are in Speaker audio mode, lift the handset and press
• If you are in Speaker/headset audio mode, press
• When the handset is on hook, press
When handsfree is on, the speaker light turns on.

Using a Headset

The 6735i and 6737i phones accept headsets through the modular RJ22 jack on the back of the phone. Contact your tele-
phone equipment retailer or distributor to purchase a compatible headset.
Note:
Customers should read and observe all safety recommendations contained in headset operating guides when using
any headset.
The phone has three options for the headset microphone volume. For more information about the headset microphone,
.
see Set Audio on page 25
Follow these steps to make and receive calls using a headset.
1. Ensure that you have selected a headset audio mode. See
2. Plug the headset into the jack.
6735i/6737i User Guide for Clearspan – 2862-002 – September 2014
, or lift the Handset or press any line keys.
and enter a number at the dial tone.
or the line/call appearance button.
to switch between handsfree and headset.
to disconnect the call.
"Set Audio" on page
to switch between handsfree and handset.
25.
Making Calls
13