Aastra 6735i User Manual page 59

Phone A calls the SCA number and
all the phones in the SCA environment
ring.
Note: You can place a call on hold while in an SCA bridged call, by pressing the SCA line key.
Using the example above, when a call comes into Phone 1, Phone 2 and Phone 3 can pick up the same call by pressing the
SCA line key. Phone 2 and 3 display the call they are bridging into on the LCD of the phones. Existing SCA parties in a
bridge or one-to-one call hear an audible beep when another party has joined the call.
Note:
Your Administrator must enable/disable the beep on the server-side.
If a phone is configured for SCA bridging and it attempts to join a call, but the account on the server does not have this
functionality enabled, an error message displays to the LCD on the phone.
The SCA call bridging feature is disabled by default on all phones. Your System Administrator can enable/disable this fea-
ture if required. Contact your System Administrator for more information.
Keys States and LED Behavior
There are two call states on the phones that support SCA bridging:
• Bridge-active - A bridged call is in progress.
• Bridge-held - The 3rd-party (i.e., non-SCA party) in the bridge is on hold.
The following tables provide the key states and LED behavior in an SCA bridge call for users involved in an SCA call and
users not involved in the SCA call.
6735i/6737i User Guide for Clearspan – 2862-002 – September 2014
Additional Features
SCA phone 1 answers.
When 2 and 3 pickup,
1 can hangup.
SCA phone 2 joins by
pressing SCA line. When
phone 1 hangs up, 2 is still
connected. Phone 2 can
press the line key to
put SCA call on hold
leaving 3 still connected
to 1.
SCA phone 3 joins by
pressing SCA line. When
phone 1 hangs up, 3 is still
connected. Phone 3 can
press the line key to
put SCA call on hold
leaving 2 still connected
to 1.
53