Auto Install Process; Network Connected/Network Disconnected - Aastra 6735i User Manual

Getting Started
Important!
Do not unplug or remove power to the phone while it is checking or installing firmware and configuration information.
When the configuration update is complete, the phone displays the following screens and then displays the idle screen.
80%
Network

Auto Install Process

If your System Administrator uses the Auto Install application, you will be prompted to enter and confirm the Device ID
after the initial startup screens display. A configuration file is then created, and the phone restarts.

Network Connected/Network Disconnected

If your phone is successful when connecting to the network the following screen displays before changing to the idle
screen.
L1
If your phone did not successfully connect to the network, the Network Disconnected prompt appears on the display
and the telephone status light turns on.
L1
Network Disconnected
Check that the cables are tightly connected to the phone and to the wall jack. The phone should automatically detect
when it is reconnected and displays the Network Connected prompt for a few seconds. However, if changes have been
made to your phone's network settings, you may need to restart your phone.
4
John Smith
Network Connected
01/01/14 11:00am
6735i
John Smith
01/01/14 11:00am
6735i
92%
SIP
6737i
6737i
6735i/6737i User Guide for Clearspan – 2862-002 – September 2014
100%
Done