Warming Up Engine - Mercury 200 User Manual

NOTE: The engine can be started by using the ignition key or the start/stop button located on the remote
control handle.
6. Ignition key starting ‑ Turn the ignition key to "START" position and release the key. The electronic
starting system will automatically crank the engine for starting. If the engine fails to start, the
engine will stop cranking. Turn the key to "START" position again until engine starts.
7. Start/stop button ‑ Turn the ignition key to "ON" position and press start/stop button and release.
The electronic starting system will automatically crank the engine for starting. If the engine fails
to start, the engine will stop cranking. Press start/stop button and release again until engine starts.

Warming up engine

Throttle Only Button ‑ This feature allows the boat operator to increase engine RPM for warm‑up, without
shifting the engine into gear.
OPERATION
N
F
39
R
3413
3485
3414