Engine Oil Recommendations - Mercury GO BOLDLY 25 EFI Operation, Maintenance And Installation Manual

Methanol and Ethanol Fuel Blends
IMPORTANT: The fuel system components on your Mercury Marine engine will
withstand up to 10% alcohol (methanol or ethanol) content in the gasoline. Your
boat's fuel system may not be capable of withstanding the same percentage of
alcohol. Contact your boat manufacturer for specific recommendations on your
boat's fuel system components (fuel tanks, fuel lines, and fittings).
Be aware that gasoline containing methanol or ethanol may cause increased:
• Corrosion of metal parts
• Deterioration of rubber or plastic parts
• Fuel permeation through the rubber fuel lines
• Likelihood of phase separation (water and alcohol separating from the
gasoline in the fuel tank)
Fuel leakage is a fire or explosion hazard, which can cause serious injury or
death. Periodically inspect all fuel system components for leaks, softening,
hardening, swelling, or corrosion, particularly after storage. Any sign of
leakage or deterioration requires replacement before further engine
operation.
IMPORTANT: If you use gasoline that contains or might contain methanol or
ethanol, you must increase the frequency of inspection for leaks and
abnormalities.
IMPORTANT: When operating a Mercury Marine engine on gasoline containing
methanol or ethanol, do not store the gasoline in the fuel tank for long periods.
Cars normally consume these blended fuels before they can absorb enough
moisture to cause trouble; boats often sit idle long enough for phase separation
to take place. Internal corrosion may occur during storage if alcohol has
washed protective oil films from internal components.

Engine Oil Recommendations

Mercury or Quicksilver NMMA™ FC‑W® or NMMA FC‑W catalyst compatible
certified SAE® 10W‑30 Mineral Marine 4‑Stroke Engine Oil or SAE 10W‑30
Synthetic Blend Marine 4‑Stroke Engine Oil is recommended for general
all‑temperature use. As an optional choice, Mercury or Quicksilver SAE
25W‑40 Mineral Marine 4‑Stroke Engine Oil or SAE 25W‑40 Synthetic Blend
Marine 4‑Stroke engine oil may be used. If the recommended Mercury or
Quicksilver NMMA FC‑W certified oils are not available, a major outboard
manufacturer's brand of NMMA FC‑W certified 4‑Stroke outboard oil of similar
viscosity may be used.
FUEL AND OIL
WARNING
!
52
eng