Mercury 200 User Manual page 72

4. Pull propeller straight off shaft. If propeller is seized to the shaft and cannot be removed, have
the propeller removed by an authorized dealer.
5. To aid in future removal of the propeller, liberally coat the propeller shaft splines with one of the
following Mercury/Quicksilver products:
Tube Ref No.
Anti-Corrosion
94
Grease
2-4-C Marine
95
Lubricant with Teflon
6. Flo‑Torq II Drive Hub Propellers ‑ Install forward thrust hub, replaceable drive sleeve, propeller,
thrust hub, propeller nut retainer and propeller nut onto the shaft.
a
a - Propeller nut
b - Propeller nut retainer
c - Thrust hub
7. Place a block of wood between gearcase and propeller and torque to specifications.
Description
Propeller nut
8. Secure propeller nut by bending three of the tabs into the thrust hub grooves.
MAINTENANCE
Description
c
b
ob01672
Where Used
Propeller shaft
splines
Propeller shaft
splines
e
f
d
d - Propeller
e - Replaceable drive sleeve
f - Forward thrust hub
Nm lb. in.
75
66
Part No.
92-802867Q1
92-802859Q1
ob00421
lb. ft.
55