Standards; Equipment Version - ADS-tec VMT6008 User Manual

Hide thumbs Also See for VMT6008:

Table of Contents

1.7 S

TANDARDS

This device complies with the requirements and protective aims of the following EC

regulations:

•

Note:

All connected components, as well as cable connections must also meet these

requirements for compliance with the EMC legislation. For this reason, screened bus and

LAN cables including screened connectors must be used and installed according to the

instructions in this user manual.

Note:

By using the CE conformity declaration in this document, you can find detailed

information about the standards applicable to this device.

Warning:

This is equipment of class A. This unit might cause radio interferences in living areas; in

this case the operator might be obliged to take suitable protective measures at the

operators' expense."

Pos : 9 /D atentechni k/Allgemei ne Hinweis e/Auss tattungs varianten/Auss tattungs varianten für VMT 6008 @ 2\mod_1272445942248_6.doc @ 7711 @

1.8 E

QUIPMENT VERSION

The system is available in the following equipment version:

Platform including a Flash SSD:

Platform without any rotating mass storage medium (hard disc, etc.) and with an

embedded operating system (Windows CE 6.0 / XP embedded) for stationary use with a

standard Ethernet or with radio networking cards installed on moving commissioning /

forklift equipment.

Pos : 10 /D atentec hni k/Allgemeine Hi nweise/Li eferumfang/Li eferumfang für VMT 60xx-Serie @ 2\mod_1263299644184_6.doc @ 6976 @

This device meets the test requirements for granting the CE sign according to the

European test standards EN 61000-6-4 and EN 61000-6-2.

This device complies with the test requirements in accordance with DIN EN 60950

(VDE0805, IEC950) "Safety of Information Technology Equipment"

The device meets the DIN EN 60068-2-6 test requirements (sinus excitation).

The device meets the DIN EN 60068-2-27 test requirements (shock resistance

test).

Terminals VMT6008

Table of Contents