Table of Contents
Advertisement
Terminals VMT6008
5.5 USB
CONNECTIONS
The USB interfaces a
interfaces comply w
PIN NUMBER
Note:
The device support
USB Flash SSDs are
connected.
Note:
The USB interfaces
USB
CONNECTION IN
One USB interface c
cover underneath th
for opening. The pla
after use.
Pos : 29 /D atentec hni k/Schnitts tell en/PS2/Kombi Buc hs e für VMT 60xx @ 2\mod_1268840073235_6.doc @ 7482 @
5.6 PS/2
CONNECTOR
A keyboard can dire
PIN NUMBER
Note:
Since the timing of
keyboards of this m
If the soft keyboard
for control purpose
The keyboard must
interface is initialise
device is running w
functional.
Pos : 30 /D atentec hni k/Schnitts tell en/Netz werkansc hlus s RJ 45/Netz wer kansc hluss RJ 45 für VMT 60xx @ 2\mod_1260451135970_6.doc @ 6856 @
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-E
are used for connecting peripherals with USB con
with the USB 2.0 standard requirements.
SIGNAL NAME
1
2
3
4
rts a maximum of 6 external USB mass storage de
re integrated, a maximum of 6 USB mass storage
s can be individually locked by using the "Lock US
N THE FRONT PANEL
can be accessed from the front. The interface is
he display. The cover has a tab on the right-ha
astic cover of the USB interface must be returned
ectly be operated by using the PS/2 socket connec
SIGNAL NAME
Keyboard data
1
2
Mouse data
3
4
5
Keyboard clock
6
Mouse clock
f the integrated controller is specifically set up for
manufacturer should preferably be used.
rd is actively displayed on the monitor, the use of
es is limited.
st be connected before switching the device on, b
sed in the process of booting. If the keyboard is p
without having had the keyboard connected while
Echterdingen
VDC
D -
D+
GND
GND
+5V
nnection. These
evices. If two internal
e devices can be
SB" software tool.
located under a plastic
nd side, which is used
d in protective position
ctor.
r Cherry keyboards,
f the external keyboard
because the keyboard
plugged in while the
e booting, it will not be
25
Advertisement
Table of Contents
