Table of Contents
Advertisement
1
φ6 plat washer Hexagon socket Bolt M6X20
2
Fan cover
3
The cover of carbon bush holder
4
Carbon brush
Loosen the four set screws and remove the fan cover. Remove the brush caps and carbon
brushes. After replacing the carbon brushes, tighten the brush caps securely and install the fan
cover with securely tightening four set screws.
Remark: after carbon brush replacement, please make sure all of the screws are tightened
enough!
6. Cleaning
Clean the machine regularly with a soft cloth, preferably after each use. Solvent such as gasoline,
thinner, alcohol etc.. These kind of chemical materials are not allowed to use, water or soap are
recommended!
7. Warranty
For the condition of warranty, please refer to the separately provided warranty card.
Environment
Faulty and /or discarded electrical or electronic apparatus have to be collected at the appropriate
recycling location.
13
Advertisement
Table of Contents
