Page 1
HANDLING INSTRUCTIONS Original Instructions Before using this XINPU demolition hammer, please carefully read though these HANDLING INSTRUCTIONS. Ensure that you know how the machine works, and how it should be operated. Maintain the machine in accordance with the instructions, and make certain that the machine work correctly, please store this instriation and other enclosed documents with the machine together.
list: General Power Tool Safety Warnings Special Warning for Electric hammer Safety instructions Intended Use Technical Data Accessories Name of the parts Assembly Operation Maintenance and Service Warranty Environment General Power Tool Safety Warnings WARNING : Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury.
Page 3
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
Page 4
c) Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
Page 5
Always wait until the power tool has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool. Do not use the power tool with a damaged cord. Do not touch the damaged cord and pill the plug from the outlet when the cord is damaged while working.
Safety instructions In this operator's manual/or machine’s labels following symbols are used: Accordance with essential applicable safety of European directives Double insulation Denote risk of personal injury, loss of life or damage to the tool in case of nonobservance of the instruction in this manual.
The power tool is intended for chiseling work in concrete, brick, masonry and asphalt as well as for driving in and compacting, when using the respective accessories. SPECIFICATIONS Technical Data Demolition Hammer XP-G55B Rated Voltage 220-240V Frequency 50Hz Rated input...
Name of the parts 1. Hammer rod protector 2. Protective lining 3. Move limited ring 4. Switch Push-And-Pull 5. Speed Adjuster Function Knob 6. Indicator 7. Side Handle 8. Function Knob Assembly Auxiliary Handle Operate your power tool only with the Side Handle7. The Side Handle 7 can be set to any position for a secure and low-fatigue working posture.
Operation Starting Operation Observe correct mains voltage! The voltage of the power source must agree with the voltage specified on the type plate of the power tool. Switch On and Off To start the power tool, push the Switch Push-And-Pull to the right. To Switch off the power tool, push the Switch Push-And-Pull 4 to zhe left.
If the power tool should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an after-sales service center for XINPU power tools. Warranty For the condition of warranty, please refer to the separately provided warranty card.