Table of Contents
Advertisement
Maintenance and Service
Before any work on the power tool itself, pull the mains plug.
For safe and proper working, always keep the power tool and the ventilation slots clean.
A damaged hammer rod protector should be changed immediately. We recommend having this carried out
by an after-sales service.
Indicator 7
When the carbon brushes are worn out, the power tool switches itself off. This is indicated approx. 8 hours
beforehand by the lighting or blinking of the indicator 7. The power tool must then be sent to an after-sales
service agent. Addresses are listed in the Section "Service and Customer Assistance".
If the power tool should fail despite the care taken in manufacturing and testing procedures, repair should
be carried out by an after-sales service center for XINPU power tools.
In all correspondence and spare parts orders, please always include the 8-digit article number given on the
type plate of the power tool.
Warranty
For the condition of warranty, please refer to the separately provided warranty card.
Environment
Faulty and /or discarded electrical or electronic apparatus have to be collected at the
appropriate recycling location.
Advertisement
Table of Contents
