Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Xinpu Manuals
  4. Power Hammer
  5. XP-G80BD
  6. Handling instructions manual

Xinpu XP-G80BD Handling Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Demolition Hammer
Model: XP-G80BD
HANDLING INSTRUCTIONS
Before using this XINPU demolition hammer, please carefully read though these
HANDLING INSTRUCTIONS. Ensure that you know how the machine works, and how it should
be operated. Maintain the machine in accordance with the instructions, and make certain that the
machine work correctly, please store this instriation and other enclosed documents with the
machine togeth
Bj:2014
Zhejiang Xinpu Industrial & Commercial Co., Ltd.
106, No. 330 National Road, Huajie Industrial Zone, Yongkang City, Zhejiang 321300, P. R. China

Advertisement

loading

Related Manuals for Xinpu XP-G80BD

Summary of Contents for Xinpu XP-G80BD

  • Page 1 Model: XP-G80BD HANDLING INSTRUCTIONS Before using this XINPU demolition hammer, please carefully read though these HANDLING INSTRUCTIONS. Ensure that you know how the machine works, and how it should be operated. Maintain the machine in accordance with the instructions, and make certain that the...

  • Page 2: Table Of Contents

    Contents 1. Machine information 2. Safety instruction 3. Assembly 4. Operation 5. Maintenance Warranty Environment 1. Machine information Technical specifications XP-G80BD Machine Type Voltage AC 22-240V Frequency 60Hz Input power 1700W Impact rate 1500/min Weight(w/o cord) 19.3kg...
  • Page 3 Optional accessories (sold separately） Notice: Optional accessories (sold separately) are recommended only for XINPU tool for specified purpose in manual, any other brand accessories or attachments used may present risk of injury. 1. Bull point Hexagon size28*410 length (Unit: mm) 2.

  • Page 4: Safety Instruction

    2. Safety instructions In this operator's manual/or machine’s labels following symbols are used: Read the manual carefully Double insulation Denote risk of personal injury, loss of life or damage to the tool in case of nonobservance of the instruction in this manual. Indicate electrical shock hazard.
  • Page 5 General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool. Work area safety Keep work area clean and well lit.
  • Page 6 medication. A moment of inattention while operating power tools may result in serious personal injury. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
  • Page 7 Any damage and abnormal happen, please stop to use immediately and disconnect it, ask authorized serve center to check and repair. Parts replace: Only original XINPU's parts can be used to replace by authorized service center. Right use accessories and parts: Don't use other parts and accessories which not mentioned in the...

  • Page 8: Assembly

    3. Assembly Name of the parts 4. Operation instructions Prior to operation Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up use of this products. 1. Power source Ensure that the power source to be utilized conforms to the power requirements which specified on the name plate of the hammer.
  • Page 9 a certain time. This start-up time can be shortened by striking the chisel in the power tool against the floor one time. Indicator LEDS The green power-ON indicator LED lights up when the tool is plugged. If indicator led does not light up, the mains cord or the controller may be detective.
  • Page 10 the shank. See Figure 3. Physically check that the Chisel is secure before operating. 1. Pull the Lock Lever open about 70-80° to the second engaging position, as shown in Figure 4. Figure 4 2. Insert the collared Chisel. 3. Slide the Clisel in as far as it will go. Figure 5 4.
  • Page 11 图 2 图 3 图 1 Fill the 45g Fill the 10g grease into oil into the the aluminum cylinder head bottom 图 4 图 5 图 6 Fill the 5g grease into the Piston 图 8 图 7 1. Loosen the four screws and Washers between aluminum head and gear box by 6mm HEX head wrench.(See Fig1) 2.

  • Page 12: Warranty

    Notice：Please fill the 45g grease into the aluminum head bottom (See Fig 4 and Fig 5) 7. Fill the 10g oil in the cylinder; please make sure it is clean before filling. (See Fig 6) 8. Fill the 5g grease into the piston. please make sure it is clean before filling. (See Fig 7) 9.