Advertisement
Quick Links
Demolition Hammer
Model: XP-G65BH-1
HANDLING INSTRUCTIONS
With active vibration reducing system
Original Instructions
Before using this XINPU demolition hammer, please carefully read
though these HANDLING INSTRUCTIONS. Ensure that you know how the
machine works, and how it should be operated. Maintain the machine in accordance
with the instructions, and make certain that the machine work correctly, please store
this instriation and other enclosed documents with the machine togeth
Bj:2013
Zhejiang Xinpu Industrial & Commercial Co., Ltd.
106, No. 330 National Road, Huajie Industrial Zone, Yongkang City, Zhejiang 321300, P. R. China
Advertisement
Related Manuals for Xinpu XP-G65BH-1
Summary of Contents for Xinpu XP-G65BH-1
- Page 1 HANDLING INSTRUCTIONS With active vibration reducing system Original Instructions Before using this XINPU demolition hammer, please carefully read though these HANDLING INSTRUCTIONS. Ensure that you know how the machine works, and how it should be operated. Maintain the machine in accordance...
-
Page 2: Table Of Contents
Contents 1. Machine information 2. Safety instruction 3. Assembly 4. Operation 5. Maintenance Warranty Environment 1. Machine information Technical specifications Machine Type XP-G65BH-1 AC 220-240V Voltage 50Hz Frequency 2000W Input power 1500/min Impact rate 18kg Weight 55 J... - Page 3 1 couple Optional accessories (sold separately） Notice: Optional accessories (sold separately) are recommended only for XINPU tool for specified purpose in manual, any other brand accessories or attachments used may present risk of injury. 1. Tine point Hexagon size30*410 length (Unit: mm) 2.
- Page 4 5. Bush hammer heads + Shank Hexagon size30*410 length (Unit: mm) Tooth distance: 12mm Tooth high: 8mm Length*width: 60*60mm 6. Tamping plate + Shank Hexagon size30*394 length (Unit: mm) Length*width: 150*150mm 7. Big flat spade+ Shank Hexagon size30*296 length (Unit: mm) Length*width: 170*150mm 8.
-
Page 5: Safety Instruction
2. Safety instructions In this operator's manual/or machine’s labels following symbols are used: Read the manual carefully Accordance with essential applicable safety of European directives Double insulation Denote risk of personal injury, loss of life or damage to the tool in case of nonobservance of the instruction in this manual. - Page 6 General Power Tool Safety Warnings WARNING ： Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refer to your mains operated (corded) power tool or battery operated (cordless) power tool.
- Page 7 Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
- Page 8 12、Any damage and abnormal happen, please stop to use immediately and disconnect it, ask authorized serve center to check and repair. 13. Parts replace: Only original XINPU's parts can be used to replace by authorized service center. 14. Right use accessories and parts: Don't use other parts and accessories which not mentioned in the...
-
Page 9: Assembly
manual otherwise may cause injuries! 15. Special attention to voltage: Before connect the power tool, please make sure the rated voltage on the tool can match the power supply, otherwise the power tool may be damaged and cause injuries. 16. Don't wipe plastic part with solvent: Solvent such as gasoline, thinner, alcohol etc. these kind of chemical material, are not allowed to use, water or soap are recommended! 17. -
Page 10: Operation
Fan cover Encloser Switch Main handle Mounting tool bits Warning: before do it, make sure unplug the machine! (1) Pull out of the retainer "2", turning 180℃ clockwise or anticlockwise, insert the accessory shank portion"1" into the hole on the front cover. (2) Turning the retainer back into original position. -
Page 11: Maintenance
Switch operating Push to the top as arrow 1 direction; Push back to max. as arrow Switch ON 2 direction(power source on)，then push as arrow 1 direction to max.(lock switch). Switch OFF When press the switch button again, switch is to off positon. Operation 1. - Page 12 图 1 图 2 图 3 图 4 图 5 图 6 图 7 图 8 1. Loosen the 4 screws between aluminum head and gear box by 6 mm HEX head wrench.(See Fig1) 2. Disassemble the aluminum head, cylinder and piston.(See Fig2) 3.
- Page 13 the case. (Please contact with our authorized dealer to purchase, the part No 103). Notice：There are 4 grooves in the aluminum head, Please fill the grease in all these 4 grooves by 7.5 g in each, and total 30 g grease. (See Fig 5 and Fig 6) 6.
-
Page 14: Warranty
Screw M4x10 Brush holder Cap rubber The cover of carbon bush holder Carbon brush When replace the carbon brush, just dismantle parts as order1,2,3…, after that assembly in reverse order Remark: after carbon brush replacement, please make sure all of the screws are tightened enough! 6. - Page 15 CE Declaration of conformity Zhejiang Xinpu Industrial & Commercial Co., Ltd. We herewith declare, No.106, 330 National Highway, Huajie Industrial Zone, Yongkang, Zhejiang 321300, China That the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circulation by us.