2
2
3
1
BELT DRIVE
3. Remove:
8 secondary sheave assembly 1
1
8 V-belt 2
NOTE:
Remove the V-belt and clutch assembly from the
primary sheave side.
EAS00319
DISASSEMBLING THE SECONDARY SHEAVE
1. Remove:
8 clutch carrier nut 1
NOTE:
Install the clutch spring holder 2 and clutch
spring holder arm 3 onto the secondary sheave
as shown. Then, compress the spring, and re-
move the clutch carrier nut 1.
Clutch spring holder
CHECKING THE CLUTCH SHOE
1. Measure:
8 clutch shoe
a
Scratches
paper.
Damage/wear
Clutch shoe thickness
NOTE:
Inspect clutch shoes a.
After removing the clutch weight spring, do not
use them again.
Replace the all two as a set.
5-39
ENG
90890-01337 (YM-33285)
(YM-33285-6)
Glaze using coares sand-
Replace
3.7 mm (0.146 in)
<Limit>: 2.0 mm (0.079 in)