Disassembling The Secondary Sheave; Checking The Clutch Shoes - Yamaha XF50W Service Manual

%-©
1 // / /Py*—\ 1
BELT DRIVE
3. Remove:
8secondary sheave 1
8V-belt 2
NOTE:
Remove the V-belt and secondary sheave from
the primary sheave side.
EAS00319
DISASSEMBLING
SHEAVE
1. Remove:
8clutch carrier nut 1
NOTE:
Install the clutch spring holder 2 and clutch
spring holder arm 3 onto the secondary sheave
as shown. Then, compress the spring, and re-
move the clutch carrier nut 1 .
Clutch spring holder
90890-01337
YM-33285
YM-33285-6

CHECKING THE CLUTCH SHOES

The following procedure applies to all of the clutch
shoes.
1. Check:
• clutch shoe
Damage/wear
shoes and springs as a set.
Glazed areas -»Sand with coarse sand-
paper.
NOTE:
After sanding the glazed areas, clean the clutch
with a cloth.
2. Measure:
• clutch shoe thickness
Out of specification
shoes and springs as a set.
5-45
ENG
m
%
THE SECONDARY
-» Replace the clutch
-» Replace the clutch