Assembling The Brake Shoe Plate - Yamaha XC50V Service Manual

3
1
2
1
REAR WHEEL AND BRAKE
a
b
1
4-17
EAS00570

ASSEMBLING THE BRAKE SHOE PLATE

1. Install:
8 brake camshaft 1
7 Nm (0.7 m • kg, 5.1 ft • lb)
8 return spring 2
8 brake shoe wear indicator 3
*****************************************************
Install the brake camshaft 1 so its punch
a.
mark a is positioned as shown.
Align the projection b on the brake shoe
b.
wear indicator with the notch in the brake
shoe camshaft.
c. Check that the brake shoes are properly
positioned.
*****************************************************
2. Install:
8 brake shoes1
8 tension springs
cC
8 8 8 8 8 Do not put lubricating oil on the brake
lining.
8 8 8 8 8 Change the tension spring at the same
time of changing the brake shoe.
8 8 8 8 8 Refer to the direction in the illustration
when assembling the brake shoe and
spring.
8 8 8 8 8 Refer to the illustration with regards to
the assembly direction of tension spring,
and do not let the spring hook and coil
to be damaged by the pliers.
CHAS