Disassembling The Secondary Sheave - Yamaha YP250R 2005 Service Manual

3
1
2
1
BELT DRIVE
2. Loosen:
• clutch carrier nut 1
2
CAUTION:
Do not remove the clutch carrier nut at this
stage.
NOTE:
While holding the clutch carrier with the
sheave holder 2, loosen the clutch carrier nut
one full turn with the locknut wrench 3.
3. Remove:
• secondary sheave assembly 1
• V-belt 2
NOTE:
Remove the V-belt and secondary sheave
assembly from the primary sheave side.
EAS00319
DISASSEMBLING THE SECONDARY
SHEAVE
1. Remove:
• clutch carrier nut 1
NOTE:
While compressing the compression spring
with the clutch spring holder 2 and clutch
spring holder arm 3, remove the clutch carrier
nut.
5 - 41
ENG
Sheave holder
90890-01701
Locknut wrench
90890-01348
Clutch spring holder
90890-01337
Clutch spring holder arm
90890-01464