Yamaha XC50V Service Manual page 47

1 Battery negative - lead
2 Battery positive + lead
3 Fuse box
4 Starter motor lead
5 AC magneto lead
6 Fuel sender
A Insert the wire harness cable
strap into the footrest bracket
of hole.
B Route the wire harness
through concave of the re-
covery tank and clamp it.
C Insert the ignition coil con-
nector into the ignition coil -
terminal.
D Clamp the starter relay to the
under cover of rib.
B
A
P
E Route the starter motor lead
through upward of the en-
gine bracket and through left
side of the wire harness.
F Route the breather pipe
through downward of the
spacer.
G Clamp the taillight lead to the
side cover of hook.
H Install the C.D.I. unit to the
fuel tank bracket of bracket
1.
I Clamp the seat lock cable
protector of marking position
to the fuel tank bracket.
J Route the drain pipe along
the fuel tank bracket and
through the clamp.
K Route the fuel hose and pipe
7 through downward of the
breather pipe.
1
D
3
2
C
M
N
O
CABLE ROUTING
E
5
F
4
K
L
J
2-31
SPEC
L Route the throttle cable kit
through upward of the
breather pipe.
M Clamp the auto choke lead
and T.P.S. lead to the mani-
fold of clamp.
N Install the ignition coil to the
engine.
O Install the clamp to the under
cover of hole.
P Install the clamp to the foot-
rest bracket of hole.
6
G
H
I