Transducer Removal - Husqvarna CR 50 / 2011 Workshop Manual

1
3
H06260
5
Ed. 01-02-2010
GENERAL PROCEDURES

Transducer removal

-
4
-
2
-
6
5
-
-
-
2
H02103
H02102
Remove: saddle and fuel tank as described in the relevant paragraphs.
Remove the spark plug cap (1).
Cut clamp (2).
Loosen ground screw (3) using a 5 mm Allen wrench.
Disconnect the connector (4).
Using a 8 mm ring wrench, loosen the two screws (5) of transducer mounting
bracket, then remove transducer (6) with bracket.
E.13