Discrete 2 Of 5 (Dtf); Enable/Disable Discrete 2 Of 5 - Motorola DS9208 Product Reference Manual

Discrete 2 of 5 (DTF)

Enable/Disable Discrete 2 of 5

Parameter # 5
To enable or disable Discrete 2 of 5, scan the appropriate bar code below.
Enable Discrete 2 of 5
Set Lengths for Discrete 2 of 5
Parameter # L1 = 20, L2 = 21
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for D 2 of 5 to any length, one or two discrete lengths, or lengths within a
specific range. The default option is One Discrete Length: 12.
NOTE When setting lengths, enter a leading zero for single digit numbers.
•
One Discrete Length - Decode only D 2 of 5 symbols containing a selected length. Select the length
using the bar codes in
with 14 characters, scan D 2 of 5 - One Discrete Length, and then scan 1, 4. To correct an error or to
change the selection, scan
•
Two Discrete Lengths - Decode only D 2 of 5 symbols containing either of two lengths. Select
lengths using the bar codes in
symbols containing either 2 or 14 characters, select D 2 of 5 - Two Discrete Lengths, and then scan
0, 2, 1, 4. To correct an error or to change the selection, scan
•
Length Within Range - Decode a D 2 of 5 symbol with a specific length range. Select lengths using
bar codes in
between 4 and 12 characters, first scan D 2 of 5 - Length Within Range, and then scan 0, 4, 1, 2. To
correct an error or change the selection, scan
•
Any Length - Decode D 2 of 5 symbols containing any number of characters within the digital scanner's
capability.
(1)
Appendix G, Numeric Bar
Cancel on page G-2.
Appendix G, Numeric Bar
Appendix G, Numeric Bar Codes.
*
Disable Discrete 2 of 5
Codes. For example, to decode only D 2 of 5 symbols
Codes. For example, to decode only D 2 of 5
Cancel on page
For example, to decode D 2 of 5 symbols containing
Cancel on page G-2.
Symbologies 10 - 55
(0)
G-2.