Edid Minder - Extron electronics XTP T USW 103 User Manual

EDID Minder

Use the EDID Minder screen to assign unique EDID to the input or match current output
resolutions to the input. Click the
navigation bar. The EDID Minder screen opens.
The EDID Minder screen displays a table of EDID options and connected output devices,
which are each represented by output display icons.
• Factory default EDID options are displayed in blue.
• Connected output resolutions and devices are displayed in green.
Custom loaded or saved EDID options are displayed in yellow.
•
Figure 26. EDID Minder Screen
Assign EDID
To assign EDID to selected inputs:
1. Select an available EDID setting (represented by a blue, green, or yellow output display
icon) from the Favorites, Connected Outputs, or Available EDID panel (see
2. In the list of Inputs on the right side of the screen, select the check box of the
connected inputs (see
3.
Click the button below the input area (see
Assign
TIP: Alternatively, EDID can be assigned by dragging and dropping the desired EDID
onto the input.
To assign EDID to all inputs:
1. Select an available EDID setting (represented by a blue, green, or yellow output display
icon) from the Favorites, Connected Outputs, or Available EDID panel (see
2. Below the list of inputs on the right side of the screen, click the
(see ).
7
XTP T USW 103 Switcher • XTP System Configuration Software
icon (see figure 26,
EDID Minder
).
5
) on the global
1
-
2
).
6
-
2
Assign to All
).
4
).
4
button
30