Printer Problem Checklist - QMS 1660 Operation

Printer Problem
Checklist
Verifying the Serial Port Setting Changes
1 Reboot the printer.
2 Compare the serial port settings listed on the start-up page
to those in your AUTOEXEC.BAT file.
3 Try the communication test again.
If a blank page ejects from the printer, the printer and the com-
puter are communicating.
If a blank page doesn't eject and you typed the file correctly, see
the following section, "Printer Problem Checklist," and refer to
your DOS documentation for more information.

Printer Problem Checklist

This section contains a list of possible printer problems and solutions.
If you have just installed your printer and are having problems, be sure
you have correctly followed the steps outlined in Getting Started .
If there is no status message in the message window, use the following
steps to identify the source of your problem and to learn possible
solutions:
1 Do all indicators come on when the printer power is turned on?
Yes
6-18
n
Go to question 2.
QMS 1660 Print System Operation