Table of Contents
Advertisement
The following status messages may appear in the message window:
This message...
x ACTIVE JOBS
ADJUST INPUTBIN BIN
CANCELLING JOB
CLOSE ENGINE
DOOR(S)
IDLE
INPUT IDLE
PRINTING
INITIALIZING
PAPER JAM
PAPER SIZE
MISMATCH
Troubleshooting
means...
The printer is on line. x
identifies the number of jobs in
process.
A cassette is not inserted
correctly. INPUTBIN identifies
the cassette.
The Cancel key has been
pressed, and the oldest job in
the print queue is being
cancelled.
The front cover of the printer is
open.
The printer is on line, but no
jobs are in process.
The printer is on line and
printing jobs already in the
queue. No new jobs are arriving
at the communication
interfaces.
The printer is getting ready to
go on line.
Media has jammed while being
pulled from a cassette or tray,
passing through the printer, or
exiting into the output tray.
The media size selected for the
multipurpose tray is not the size
currently in the tray.
Status
Messages
Do this...
Adjust the cassette.
Close the front
cover completely.
If the printer sup-
ports the media
size you want,
insert it in the multi-
purpose tray. If the
printer doesn't sup-
port the media size
you want, select
universal as the
media size. See
"Media Size" in
chapter 4, "Printer
Configuration," of
the Reference for
more information.
6-9
Advertisement
Table of Contents
