Clearing Front Inside Area Jams - QMS 1660 Operation

Clearing Media
Jams

Clearing Front Inside Area Jams

M
WARNING! The fixing assembly and print delivery guide become
extremely hot when the printer is used. Personal injury could result if
you touch those area.
ACHTUNG! Die Fixiereinheit und die Papierführung werden sehr
heiß, wenn der Drucker in Betrieb ist; bei Berührung dieser Partien
besteht Verletzungsgefahr!
1 Using both hands, open the multipurpose tray.
2 Push up on the release button, and open the front cover.
3 Remove the jam from the fixing assembly area.
n
n
»
6-4
Pull the jammed media away from the printer.
Pull the jammed media in the opposite direction (toward the
printer) only if the end of the paper has passed completely
through the fixing assembly.
Note: If print media is pulled toward the inside of the printer
before it has passed completely through the fixing assembly
area, infused toner may adhere to the inside of the printer
and stain the backs of the following printed pages.
Print Delivery
Guide
Fixing
Assembly
QMS 1660 Print System Operation