QMS 1660 Operation page 59

Print media jams can occur in any of the following areas.
Upper Cassette
Pick-up Roller
Lower Cassette
Pick-up Roller
Check each of the indicated locations, and remove any jammed print
media. Jams can occur in more than one location at a time, so be
sure to check all the indicated locations. After clearing the jam,
always open and close the front cover once before printing. Printing
will not resume until you do this.
When printing from a cassette, check for the media jam in the fol-
lowing order:
n
Check the front inside area.
n
Check the paper cassette area.
n
Check the front upper door area.
When printing from the multipurpose tray, check for the media jam
in the following order:
n
Check the multipurpose tray area.
n
Check the front inside area.
n
Check the front upper door area.
Troubleshooting
Fixing
Assembly
Area
Clearing Media
Jams
Front Upper Door
Multipurpose
Tray Pick-up Roller
6-3