Table of Contents
Advertisement
Status
Messages
This message...
PRINTING STATUS
PUT SIZE PAPER IN
ANY BIN
PUT SIZE PAPER IN
INPUTBIN BIN
TEST PRINT
TONER ABSENT
TONER OUT
WAITING FOR IDLE
WAITING ON INPUT
END JOB?
WARMING UP
6-10
means...
A status page is printing.
The Operator Control/Chain
Inputbins menu is set to On and
the chained cassettes are
empty.
The Operator Control/Chain
Inputbins menu is set to Off and
a media cassette (or the
multipurpose tray) is empty.
SIZE is the media size the
cassette is currently configured
for. INPUTBIN is the empty
cassette or multipurpose tray.
A test print page is being
printed.
The toner cartridge is not
installed.
The toner cartridge is empty.
A job is in process. Access to
the menu is not allowed until
the job is finished.
The compiler is waiting on
incoming data for the first job in
the queue. The job may not
have an end-of-job indicator
and therefore can't end. The
message clears if more input
arrives from the port or if you
press the Cancel key. No other
jobs can be printed until this job
has ended.
The printer is warming up.
QMS 1660 Print System Operation
Do this...
Refill an empty
cassette with the
specified size
media.
Refill the cassette
or multipurpose tray
with the specified
size media.
Replace the toner
cartridge. Refer to
chapter 2, "Con-
sumables," for
instructions.
Wait until the job is
finished and the
printer goes idle to
access the configu-
ration menu.
Cancel or end the
print job.
Wait until the IDLE
message displays
before printing.
Advertisement
Table of Contents
