Panasonic CS-G95KE CU-G95KE Service Manual page 57

Adjusting Airflow Direction and Fan Speed
Proper adjustment of airflow direction and fan speed increases operation
effectiveness.
CLOCK
AUTO
MODE
WIDE/SPOT
AUTO FAN
FAN SPEED
AUTO
AIR SWING
TIMER
1 ON OFF
2
SLEEP
3
SET
CANCEL
SPOT WIDE
To adjust fan speed
Press FAN SPEED Button
There are five stages of fan speed in
addition to Auto Fan Speed.
Auto Fan Speed Control
Heating
When the temperature of the discharge air
increases, the fan speed increases.
Cooling Soft Dry
Changes the fan speed to generate a cool breeze. The air starts to blow out
approximately 40 seconds after the start of Cooling or Soft Dry.
To adjust the vertical airflow direction louvers
Press Button
There are five angles of vertical direction in addition to Auto Air-
flow Direction.
The display changes when the
(The display indicates airflow direction.)
Auto Vertical Airflow Direction Control
Heating
When the discharge air temperature is low such as at starts of heating op-
eration, the air blows at horizontal level.
As the temperature rises, the hot air blows in a downwards direction.
Cooling Soft Dry
The louver swings up and down automatically.
To adjust the horizontal airflow direction louvers
Press Button
There are seven positions of the horizontal airflow direction
louvers in additional to Auto Airflow Direction.
The display changes when the
(The display does not show the exact directions of airflow or the
exact louver angles.)
Auto Horizontal Airflow Direction Control
Heating
When air temperature is low, air is sent in WIDE. When temperature goes
up, air comes out in SPOT.
Cooling Fan
Louvers swing horizontally at a fixed speed.
Soft Dry
Louvers are fixed to WIDE.
57
CS-G95KE CU-G95KE / CS-G125KE CU-G125KE
Display Example
Auto Fan Medium Fan
Speed Speed
COOL COOL COOL COOL
AUTO FAN AUTO FAN
h j k
button is pressed.
button is pressed.