Panasonic CS-G95KE CU-G95KE Service Manual page 92

S-G95KE CU-G95KE / CS-G125KE CU-G125KE
d. Outdoor Electronic Controller Removal Procedure
1. Remove the top pane and front panel
2. Remove the Outdoor Electronic Controller
Caution! When handling electronic
controller, be careful of electrostatic
discharge.
Fig. 20
Fig. 22
• Be save to return the wiring to its original position
• There are many high voltage components within the heat
sink cover so never touch the interior during operation.
Wait at least two minutes after power has been turned off.
Note: Use magnetic type of screw driver to avoid dropping of the
screws.
92
Fig. 21
Fig. 23