Panasonic CS-G95KE CU-G95KE Service Manual page 54

S-G95KE CU-G95KE / CS-G125KE CU-G125KE
Remote control
Operating the remote control
The maximum distance at which signals can be
received is about 10 m.
Aim the remote control at the signal receptor on
the room air conditioner when operating.
Make sure that the signal path is not obstructed.
Inserting batteries
(2 pcs R03 dry-cell batteries)
1 Gently press the
place marked OPEN
and slide the cover
towards you.
Confirm that the display is flashing 12:00 PM. If
the display does not appear when the batteries
are inserted, remove them and re-insert.
PM
To prevent battery exhaustion , set the current
time (CLOCK) immediately.
2 Be sure that the e
and r directions are
correct.
54
Batteries
The batteries can be used for approximately one
year.
Observe the following when
replacing the batteries
Replace the batteries with 2 new batteries of
the same type.
Do not use rechargeble batteries (Ni-Cd),
because they are different from standard
dry-cell batteries in shape, dimensions and
performance.
If the unit is not going to be used for an
extended period of time, remove the
batteries from the remote control.
Setting the clock
1
Press the Clock button.
PM flashes and 12:00 lights up.
PM
2 Press or
time.
Press
PM
warding and
3 Press the Clock button.
AM or PM lights up.
PM
Notes
Do not throw or drop the remote control. Do
not let it get wet.
Certain types of fluorescent lamps may af-
fect signal reception. Consult your dealer.
to set the current
continuously for fast for-
for fast reversing.