Fully Automatic Cooking Function - Belling Hob Users Manual & Installation Handbook

UsInG tHe clocK/pRoGRaMMeR-elec(
Use the plus & minus icons to select the
time the oven is required to switch off.
Once this is done the oven will switch
itself off at the pre-selected time. To turn
the alarm off, touch any icon.
To cancel the semi-automatic programme
at any time, touch the plus & minus icons
together.
fully automatic cooking
This function allows the cooker to switch
on & off automatically. It requires both the
duration & the end time to be entered.
The timer will work out the start time &
begin cooking.
Touch & hold the centre (function) icon;
the bell will flash & you will hear a beep.
Touch the centre (function) icon again
- this will skip past the minute minder
function.
The display will flash the word 'dur' & the
'A' will flash on the left hand of the display.
Use the plus & minus icons to set the
length of time you want to cook for. The
flashing will last for approximately five
seconds, so the setting must be done
within this time frame or the time of day
will show again.
Touch the centre (function) icon again -
this skips past the minute minder & dura-
tion functions.
The display will flash the word 'End' & the
'A' will flash on the left hand of the display.
Use the plus & minus icons to select the
time the oven is required to switch off.
Set the temperature of the oven & place
the food inside. The timer will calculate
the start time.
When this is done the oven will turn itself
off at the time you have selected. To
switch off the alarm, touch any icon.
To cancel the automatic programme at
any time, touch the plus & minus icons
together.
)
if fitted