Belling Hob Users Manual & Installation Handbook page 14

UsInG tHe HoB - InDUctIon
Heater Errors &
Alarms
F / 5
Induction heater temperature sensor (NTC)
F / 1
Induction heater temperature sensor (NTC)
F / 2
Induction heater temperature sensor (NTC)
F / 8
Induction heater temperature sensor (NTC)
F / 7
F / 9 Induction generator relay error
Induction generator heatsink temperature
F / 3
Induction generator heatsink temperature
F / 4
F / 6
Fault Description
Communication error
error
error
error
error
sensor (NTC) error
sensor (NTC) error
Mains zero crossing loss
Turn the controls to the off postion and turn the power off and back on to
reset the system
Turn the controls to the off postion and turn the power off and back on to
reset the system
Turn the controls to the off postion and turn the power off and back on to
reset the system
Turn the controls to the off postion and turn the power off and back on to
reset the system
Turn the controls to the off postion and turn the power off and back on to
reset the system
Turn the controls to the off postion and turn the power off and back on to
reset the system
Turn the controls to the off postion and turn the power off and back on to
reset the system
Turn the controls to the off postion and turn the power off and back on to
reset the system
Turn the controls to the off postion and turn the power off and back on to
reset the system
Ask your installer to confirm the correct connection to the power supply,
ensuring the required links are in place.