Start Cooking; Finish Cooking - Belling CH772TX User Manual

Start cooking

After switching the hob on, the buzzer will beep once. All the indicator lights, light up for a second and
go out, to indicate that the ceramic hob is now in standby mode.
1. Touch the On/Off Key for 1 second
a beep sounds and the cook zone displays become illuminated.
2. Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the bottom of the cooking
zone are clean and dry.
3. Select a heat setting by touching the "+" or "-" control.
• If you don't choose a heat setting within 1 minute, the ceramic
hob will automatically switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time during cooking.
• By holding down either of these buttons, the value will adjust
up or down.

Finish cooking

Turn the cooking zone off by scrolling down to "-" or
touching "-" and "+" control together.
Turn the whole hob off by touching the On/Off key
8