Start Cooking - Belling IH302T User Manual

Make sure that the base of your pan is smooth, sits flat against the glass. Use a pan which is at least as
large as the circle printed on the glass. Using a pan which is slightly wider than the glass circle printed
on the glass will maximise energy-efficiency. Always centre your pan on the cooking zone.
Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.

Start cooking

After switching the hob on, the buzzer will beep once. All the indicator lights light up for a second and
go out, to indicate that the ceramic hob is now in standby mode.
1. Touch the on/off power key until you hear a beep and all the displays
show dashes. This indicates that the hob is now in standby mode.
2. Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the bottom of the cooking
zone are clean and dry.
3. Touch the relevant heating zone selection control. An indicator will
flash next to the control to indicate which zone is currently selected.
9