Download Print this page

Boost Function - Belling CTC60 Users Manual & Installation Handbook

Electric built-in hob

Advertisement

Boost Function

The hob features a boost facility which enables pans to be brought up to temperature
quickly with maximum power, before dropping to a lower energy setting automatically. It is
activated as follows,
To Activate
1.
Switch on hob, as described previously.
Boost Function
Touch pad
repeatedly until 9. appears.
The dot indicates that the boost function is activated.
2.
Touch pad
energy level. It can be noted that the dot continues to be
illuminated.
If an energy level less than 6 is selected, the boost function assumes a saucepan of liquid
is to be simmered, so stays on full power for up to 7 minutes (dependant on setting) to bring
the fluid to the boil quickly. If an energy level above and including 6 is selected, the boost
function operates for less time, as if only a frying pan was being heated. As a guide, when
energy level 7 or 8 is selected the boost function will run for around 3 minutes.
If no lower energy level is selected, the hob will resume normal operation, indicated by the
dot switching off.
The table below should serve as an indication for suitable cooking energy levels.
Energy
Type Of Cooking
Level
1 or 2
To dissolve butter, chocolate etc.
3
To heat food, keep small amounts of water simmering, to beat sauces containing
egg yolk and butter. To simmer meat, fish, vegetables, fruit.
4 or 5
To heat solid and liquid foods, keep water boiling, unfreeze frozen foods, make
omelettes containing 2-3 eggs, various types of cooking.
6
To cook foods, jams etc.
7 or 8
To seal meats and fry fish.
9
Frying potatoes etc., bringing water to boil.
16
to reduce energy level to desired cooking
Installing your hob
Before cutting the work top, make sure that there is enough space
underneath to accept the hob, and that there are no supports or projections
which might interfere with fitting the hob.
Cut the aperture in the work top to the dimensions shown in the relevant
diagram below, taking care that it refers to your hob. The cut edges of the
aperture should be sealed with paint or varnish to prevent any ingress of
moisture.
Note; A small radius is permissible in each corner.
5

Advertisement

loading

This manual is also suitable for:

Ch60tCh60rx