STEP 1:
STEP 2:
STEP 3:
Do not connect power until assembly is complete
1. Open the carton
2. Extract the parts listed above
3. Place the Main Frame onto level
ground
1. Attach the left and right upright tubes (6,
7) to the main frame.
Please connect the middle signal wire and the
lower signal wire at the same time.
1. Use the 6# Allen Wrench(83), fasten
the Left Upright Tube (6) and right
upright tube(7) onto the Main Frame(1)
with Bolt (45) M10*15 and Lock Washer
(64 ).
7
PRIME