LifeSpan PRIME Owner's Manual page 13

"INCLINE+", "INCLINE-" buttons: During startup mode, set incline data with this button. When the
7.
machine is running, press theses buttons to adjust incline. Incline will be adjusted at 1 level per press,
when holding the button for over 0.5 seconds, the speed will change up or down continuously.
"INCLINE: 5, 8, 12, 18" – quick shortcut buttons to set incline.
8.
"SPEED: 5, 8, 12, 18" – quick speed shortcut buttons to set speed.
9.
10. "MUTE" button: Stop or Start the music from playing out of the speakers.
11. Emergency button: Press this button to stop the machine immediately.
QUICK START UP (MANUAL)
Switch the machine on at the power switch and twist the emergency button in a clockwise direction. The
1.
machine will then enter startup mode.
Press the START/STOP button. The machine will enter a 3 second count down. The buzzer will then
2.
make a sound and the time display window count down from 3 to 0. The speed will begin at 0.5km/hour
after the countdown.
After start-up, you can use the SPEED buttons to adjust speed and INCLINE buttons to adjust incline.
3.
THE OPERATION OF EXERCISE PROCESS:
Pressing speed-down will reduce the running speed.
1.
Pressing speed-up will increase the running speed.
2.
Pressing incline down will reduce the incline level.
3.
Pressing incline up will increase the incline level.
4.
Pressing the speed shortcut button will adjust the running speed.
5.
Pressing incline shortcut button will adjust the incline level.
6.
Pressing the stop button will stop the machine.
7.
Holding the handle pulse with two hands approximately 5 seconds will show pulse data.
8.
13
PRIME