Changing A Stored Program; Deleting A Program; Recalling A Program - Lanier LD235 Copy Reference Manual

Copying
F
Press [OK].
When the settings are successfully
stored, m appears on the left side
and the program name appears on
the right side of the registered pro-
gram number. The display returns
to the initial copy display for a
2
while.

Changing a Stored Program

A
Check the program settings.
Note
❒ When you want to check the
contents of a program, recall the
program. See p.76 "Recalling a
Program".
B
Repeat steps A to D of "Storing a
Program".
C
Press [Register].
Repeat steps E, F of "Storing a Pro-
gram".
Note
❒ When it is overwritten, the pre-
vious program is deleted.

Deleting a Program

A
Press the {Program} key.
B
Press [Delete].
C
Press the program number you
want to delete.
76
D
Press [Yes].
The program is deleted, and the
display returns to the initial copy
display.

Recalling a Program

A
Press the {Program} key.
B
Press [Recall].
C
Press the program number you
want to recall.
The stored settings are displayed.
Note
❒ Program numbers with m
against them already have set-
tings in them.
D
Place the originals, and then press
the {Start} key.