Margin Adjustment - Lanier LD235 Copy Reference Manual

Copying
Selecting [Diff. Width]
A Press [Diff. Width].
2
B Press the key for the part you
want to change, and then set an
erase margin width with [n]
and [o].
C Press [OK].
E
Press [OK].
F
Place your originals, and then
press the {Start} key.

Margin Adjustment

You can shift the image to the left,
right, top, or bottom to make a bind-
ing margin.
Reference
Related initial settings
p.97 "Front Margin: Left/Right"
p.97 "Back Margin: Left/Right"
p.97 "Front Margin: Top/Bottom"
p.97 "Back Margin: Top/Bottom"
p.97 "1 Sided→2 Sided Auto Mar-
gin: TtoT"
60
Note
❒ You can change the width of the
binding margin as follows:
Metric 0–30 mm
version (in increments of 1 mm)
Inch 0"–1.2" (in increments of 0.1")
version
A
Press [Edit / Stamp].
B
Press [Margin Adjustment].
C
Set a binding margin for a front
page. Press [←] and [→] when set-
ting the left and right margins,
and [↓] and [↑] when setting the
top and bottom margins.
Note
❒ To change the value entered,
press [←], [→], [↓], [↑] to set the
new value.
❒ If you do not need to specify the
margins for the back side pages,
press [OK] and proceed to step
E
.
D
Set a binding margin for the back
side pages. Press [←] and [→]
when setting the left and right
margins, and [↓] and [↑] when set-
ting the top and bottom margins,
and then press [OK].
Note
❒ Margin on the back side of the
page is valid only when [2 Sided]
or [Combine 2 Side] is selected.
E
Press [OK].