Table of Contents
Advertisement
3. Why does DVX-1000 automatically start using NTP server mode for time
configuration?
If the NTP server addresses are modified using the CLI, DVX-1000 will
apply the changes and switch automatically to NTP time. If you wish to
continue using manually configured time, you will have to set the time
configuration back to 'Manual' using the configuration pages.
4. Does DVX-1000 support daylight savings time?
DVX-1000 supports daylight savings time provided the time configuration
is set to NTP and the correct time zone is selected.
5. I installed the wrong SSL certificate now I cannot log into the
administration web pages, how do I revert to the default certificate?
You can use the 'restorecert' command from the CLI to restore the default
certificate.
Command:
6. Why doesn't DVX-1000 allow me to add users to Hunt/User group?
Hunt/User groups can have a maximum of 20 users per group. If you
have exceeded this number, further addition of users will fail.
7. Why doesn't DVX-1000 allow me to add a user to multiple Hunt/User
groups?
Any user can be a member of at most 5 groups. If you try to add a user to
more than 5 groups the request will be declined.
8. Why can't I add a registration manually?
The user you are trying to add a registration for might not be configured
yet. You can add registrations only for users who have already been
added to the call server following the procedure described in '
new user
'.
Please note that the recommended method for adding registration is
through a SIP compliant endpoint.
9. Why can't I add more users to DVX-100?
DVX-1000 comes pre configured with a max number of 5 users. If you
want to add more than 5 users; a separate license has to be purchased.
10. Why doesn't a feature work even after I have enabled it from the web?
All the features are activated according to their priority. If you have a
higher priority feature configured for the same user, which could be
overriding the currently activated feature. Please refer '
Table
' for more details.
11. Why doesn't Follow me – Call forwarding work, even though I've enabled
it from the phone?
Some features like Follow me – call forwarding, require additional
configuration which can only be done through the web page. Unless this
configuration is done, the feature will not work even though it is activated.
D-Link Confidential
Please
refer
the
'.
DVX-1000 User Manual
relevant
section
33
Restore Certificate
'
Adding a
Feature Priority
Advertisement
Table of Contents
