Table of Contents
Advertisement
6.3.4 Call Forward: No Answer
This subtype allows the user to configure a number where all calls will be forwarded
if there is no answer from the user. The time defined for No Answer can be
configured. (For e.g., if the No Answer Timeout interval is configured as 20 secs,
when there is no response from the user for 20 secs, the call will get forwarded).
6.3.5
Do Not Disturb – Forward To Voicemail
This feature can be configured when the user doesn't want to be disturbed. All the
calls would be forwarded to voicemail.
6.3.6
Follow Me – Call Forwarding
This feature allows a user to configure DVX-1000 to forward calls to different
numbers based on time. This feature is very useful when a user knows where he will
be during a particular interval of time on some day, and all calls to him will be
forwarded to a number he has configured for that time interval. The advantage of
this is that the whole process is transparent to the calling user. So, irrespective of
where the called user is, he will be able to receive his calls normally.
A typical scenario is described below:
User 4000 is in the office on Mondays, Wednesdays and Fridays between 10:00 a.m.
and 4:00 p.m. He can directly be contacted at his official number (say
sip:4000@dlink.co.in) at this time. He works from home on all other days within that
time
and
all
his
(sip:home@dlink.co.in).His setup will be as follows:
•
In the follow me time setup, add a time configuration with the time interval
as 10:00 to 16:00, date as 1:08:04 to 31:12:04 and day of week as Monday,
Wednesday and Friday and forwarded number as his office number.
•
Add another time configuration with the time interval as 10:00 to 16:00, date
as 1:08:04 to 31:12:04 and day of week as Tuesday, Thursday, Saturday and
Sunday and the forwarded number as his home number.
With this setup, depending on the time and day of week all his calls will be allowed to
"Follow" him. The location of the user will be completely transparent to the caller.
6.3.7 Hunt Group
This feature allows multiple users to be contacted by dialing into one configured hunt
group number. Any call to the hunt group number will be forwarded to all the users
configured in that number based on the mode of hunt group. Hunt Group can have
three modes, FIRST-ONLY, SEQUENTIAL and PARALLEL. For First-Only only the first
hunt group number will be tried, for sequential all hunt group numbers will be tried
but in a sequential manner and in case of Parallel mode all hunt group members will
be tried parallel.
7 Configuring the Auto Attendant
Auto attendant is a licensed feature of DVX-1000. The features described in this
section will be available only after purchasing the license for the same.
D-Link Confidential
calls
should
be
22
DVX-1000 User Manual
directed
to
his
home
number
Advertisement
Table of Contents
